 |
||
| TE200AEM | Microprocessor Based Temperature Sensor
The Microprocessor Based Temperature Sensors feature user friendly push button setpoint adjustment and LCD display of termperature and setpoint. |
|
| TE200 | Space Temperature Sensor
The TE200 Series space temperature sensors are available in a wide selection of enclosures with a variety of options including LCD, setpoint adjustment and push button override capabilities. |
|
| TE200 | Probe Sensors
The TE200 Series temperature sensors offer a choice of precision platinum RTD's, IC's, or NTC thermistor sensors which can be interfaced with a computerized monitoring or control system. |
|
| TE500 | Space Temperature Sensor
The TE500 Series space temperature transducers are available in a wide selection of enclosures with a variety of options including LCD, setpoint adjustment and push button override capabilities. |
|
| TE500 | Probe Sensors
The TE500 Series temperature transducers offer a precision platinum RTD w/ an analog output transducer which can be interfaced with a computerized monitoring or control system. |
|
| TE511/512 | Temperature Sensor/Transducer c/w LCD Readout
The newest line of temperature sensor / transducer featuring an on board or remote mounted transmitter display in two unique optional housings. |
|
| Temp Misc | Options
Immersion wells, assemblies and enclosures. |
|
| LLC Series | Frost Protection Thermostat
The LLC series frost protection thermostats provide a switched output based on the average temperature detected along a six meter (20 foot) capillary sensor. |
|
| RP Series | Room Pressure Monitor
The RP series Room Pressure Monitor is used to measure differential pressure between 2 rooms in the range of 0.125 to 1" wc or 30 to 250 Pa and provide an analog output, alarm relays outputs, and LCD display of the room pressure. |
|
| PGS100A | Gauge
Pressure Transducers
Gauge pressure transducers for a variety of applications. |
|
| LP2 Series | Low
Pressure Transducers
Low pressure transducers can be used to measure positive, negative or differential pressure in the ranges of 1 to 12" WC. |
|
| ULP Series | Ultra Low
Pressure Transducers
Low pressure transducers can be used to measure positive, negative or differential pressure in the ranges of 0.125 to 1" WC. |
|
| WP Series | Gauge/Differential Liquid
Pressure Transducers
Compatible with a wide range of liquids and gases. Suitable for high shock & vibration applications. |
|
| SP Series | Executive Humidity/Temperature Transducer
The Microprocessor Based Humidity/Temperature Transducer feature user friendly push button setpoint adjustments for both RH and Temperature, Manual Override and LCD display of humidity, temperature and setpoint. |
|
| RH100/200/300 | Humidity Transmitter with Temperature Sensor
The RH Series transducers are intended specifically for use in environmental monitoring and control systems and comes in a variety of enclosures. |
|
| RH110/210/310 | Humidity Transmitter c/w Temperature Transmitter
Similar to the RH100/200/300, these units come with an optional temperature transmitter that can be ordered with different outputs and temperature ranges. |
|
| ESF-35-2 | Air
Flow Transducer
ESF is an airflow transducer with a broad application area. It can be used for control, surveillance, and regulation of the flow rate in fresh-air and ventilation systems, etc. |
|
| PS | Regulated
DC Power Supplies
120 and 24 VAC input/DC outputs, adjustable voltage outputs and fuse protected. |
|
| 325/400/500 Series | AC
Current Switches
Adjustable current-operated Solid-State relays for switching AC or DC circuits. |
|
| 400/500 Series | AC
Current Sensors
Solid-State sensors for monitoring AC circuits |
|
| CS-425-HC | AC
High Current Switches
Directly control AC loads, such as relays, lamps or fans, in response to the current of a monitored AC circuit |
|
| CR-112 CR-124 |
Command
Relay
Command Relays are line voltage relays for use with the CS and SC current sensors and switches or as stand-alone devices. |
|
| CVT-100 | CT/PT Input Transducers
Power consumption monitoring and overload detection. |
|
| Accessories | Power Accessories
Split Core Current Transformer model 601T, Solid Core Current Transformer model RL, and model A3504 Switch. |
|
| ETP-9500 | Electronic
to Pneumatic Transducer
This unit installs between the controller and a pneumatic device. It offers a low cost alternative for retrofit or new construction installations. It is available in 4-20ma and 0-10vdc 2wire or 3 wire versions, with or without an enclosure. |
|
| CDD | CO2
Detector
Environmental, industrial and commercial indoor Carbon Dioxide (CO2) gas detector. Available in both space and duct mount versions. |
|
| CMD | CO
Detector
Environmental, industrial and commercial indoor Carbon Monoxide (CO) gas detector. Available in both a space and duct mount version. |
|
| AIR-300 | Air
Quality Monitor
The AIR-300 is a microprocessor based air quality monitor/controller sensitive to a wide variety of air pollutants. |
|
| DES-100 | Damper
End Switch
The damper position switch is a mechanically activated electrical switch which provides accurate and reliable indication of damper blade position. |
|
| PSR | Light
Sensor
The PSR-1 is a Light Sensitive Resistor that may be used as an input to indicate the presence of light at the sensor location. |
|
| LPI | Loop
Powered Indicator
LPI-1 loop powered indicators with large 3 1/2 digit LCD are designed to display any 4 to 20mA signal directly in the engineering units of the measured media. |
|
| WD100 | Water
Detector
The WD100 is a microchip-based device that uses gold-plated sensing probes to detect the presence of water or other conductive liquid. |
|
| LY & MY Series | General Pupose Relays
LY and MY series general purpose relays. |
|